 |
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 11 posts ] |
|
Author |
Message |
Chevroletfreak
|
Post subject: Complete LT1 motor FOR SALE!!! Posted: Mon Mar 19, 2007 10:54 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
My Camaro was recently totalled. I am currently stripping it at Kapaun.
The first thing I NEED gone is the motor.
It is a 93 LT1 w/ ~138K on it. I know the mileage sounds high, but this thing has been my daily driver for the past six years. I have upkept it to the best of my ability so don't let the mileage mislead you and come check it out for yourself. I have used only Castrol GTX with WIX oversized filters. I just did the intake leak fix, cleaned the injectors and did some polishing and customizing of the intake. The motor turns freely and should not have been harmed from the accident. It has a low hour CSR electric water pump, Stage 8 header bolts, adjustable fuel pressure regulator, 1LE AC delete pulley (now apparently discontinued), Hypertech 160 degree thermo, MSD 8.5 wires and NGK plugs. Prior to the accident it was running the best it ever has.
If someone can come get it tomorrow (Tuesday) from Kapaun I will sell it complete for $750. That's almost cheaper than shipping a motor over here.
That is the catch. It will save me a lot of headache moving so I would rather give someone a great deal and get it out of here TOMORROW!
I will be at Kapaun for most of the EARLY day so you can catch me there, but if you are extremely interested you may want to call me on my cell. It is 01-511-869-4133 and my name is Brian.
Last edited by Chevroletfreak on Mon Mar 19, 2007 11:01 pm, edited 1 time in total.
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Mon Mar 19, 2007 10:59 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Oh yeah, I will eventually have an LT1 6-speed with less than 30K miles, a 3.23 disk brake rear, a lot of misc. parts and maybe my 10.5 ZO6's with new tires, so watch for my posts.
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Garry
|
Post subject: Posted: Tue Mar 20, 2007 5:38 am |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
... talking about short notice ... 
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Tue Mar 20, 2007 6:25 am |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Yeah, I know. I am just kind of stuck because if someone will not snag it today, I will have to buy a cherry picker to get it out of the truck. I am also tired of paying for a stall. It adds up after a few days!
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Garry
|
Post subject: Posted: Tue Mar 20, 2007 7:54 am |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Silke has one I think ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Squirrelina
|
Post subject: Posted: Tue Mar 20, 2007 6:39 pm |
|
Joined: Sat Apr 13, 2002 2:00 am Posts: 2530 Location: Höheischweiler, SüdWestPfalz
|
I thought I had one too... I just don't know who got it now. No Rick does not, somebody else borrowed it.
Does not Kapaun have a lift?
I am sure that I have seen one at the Pulaski Auto Hobby before.
_________________ Silke
"It's easy to make a buck. It's a lot tougher to make a difference" --Tom Brokaw
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Tue Mar 20, 2007 7:33 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
My motor is actually hanging from the one at Pulaski. The problem is that once I load it up to take it to my house, I will have no way to off-load it from the truck without a cherry picker. If I have to I will be buying one before Thursday so I can stop paying for the stall.
Thanks and if you come across yours Silke I would greatly appreciate the use of it.
Also if anyone knows someone that may be interested in it please send them my way.
|
|
Top |
|
SRZ
|
Post subject: Posted: Thu Mar 22, 2007 3:27 pm |
|
Joined: Sun May 27, 2001 3:42 pm Posts: 3430 Location: FL
|
|
Top |
|
Garry
|
Post subject: Posted: Thu Mar 22, 2007 3:38 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
 D@mn, even the stock HP in a - what, 1600 pound? - Mini should get that thing going! Just wondering how it would get any traction, unless they loaded extra weight in the rear ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
98 T/A raptor
|
Post subject: Posted: Thu Mar 22, 2007 3:50 pm |
|
Joined: Tue Aug 17, 2004 11:24 am Posts: 501 Location: sembach germeny
|
That would be nuts. Damn I want to do that to a fiero.
_________________ 98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
Top |
|
Garry
|
Post subject: Posted: Thu Mar 22, 2007 4:11 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
or a Smart ...  Guess you'd have to mount it vertically though 
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
|
Page 1 of 1
|
[ 11 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|  |