 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
98blkbrd
|
Post subject: I'm HERE  Posted: Tue Sep 18, 2007 4:09 pm |
|
Joined: Sun Jun 24, 2007 1:44 pm
Posts: 84
Location: Ramstein AB, Germany
|
 
as it says....i'm in Ramstien with the wife....
looking 4ward to my babyboy this Nov.
I'm at billiting on Ramstein and looking for a house now. I have a deal with a Tech. to get his Opel 4X4 as soon as I pass my drivers test...
I NEED HELP though.... I had headers put on the 'ol 98 TA and I was strapped for time when I picked it up *shipped the same day I got the work done* and now its too loud and I'm affraid I will fail inspection.... I'm hoping that a new catbac will quite it down ... any thoughts?? My current CB is a Flowmaster American Thunder but it's 8yrs old *myfirst mod* I plan to put a Hooker CB on it ....???
ANy ideas?
98blkbrd
_________________
98 T/A, A4, T-Top, Black w/ slvr accent
FTRA, Whisper Lid, 160stat, SpeedInc. Dyno Tune, Moser 12blt 3.73's
BMR--STB, Torque Arm, SFC, LCA, Adj. PHB.
ZO6 SLVR 17X9.5 on all4, Kuhmo, Koni sngl adj., Eibach 1.5drop, PowerSlot Rotors,Hawkpads
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Tue Sep 18, 2007 5:45 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Welcome! Hope you're through with drivers license etc for the October Bitburg Quartermile ... would be nice to meet you ...
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Tue Sep 18, 2007 6:18 pm |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Wed Sep 19, 2007 4:16 pm |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
Roy wrote: Welcome dude
Start stuffing steel wool up the pipes til it gets quiet.
This works.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Wed Sep 19, 2007 9:07 pm |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
Welcome man! Steel is the trick. How loud were you?
|
|
| Top |
|
|
a10beav
|
Post subject: Posted: Wed Sep 19, 2007 9:38 pm |
|
Joined: Fri Mar 02, 2007 2:29 am
Posts: 496
Location: Ramstein
|
|
Welcome!
The Hooker will still be too loud. I added a Moroso spiral flow to my exhaust, it's low resistance but it'll cut a few db's. They didn't actually put the gauge on my car when I went back, so I don't know how much quieter it is.
_________________
Johnny
1988 LS2 Firebird
1999 Formula Firehawk (stateside storage)
2007 Z4 M-Coupe
|
|
| Top |
|
|
98blkbrd
|
Post subject: Posted: Sat Sep 22, 2007 3:00 pm |
|
Joined: Sun Jun 24, 2007 1:44 pm
Posts: 84
Location: Ramstein AB, Germany
|
|
thanks for the welcomes...
The ride wont be hear till mid Nov and becuase thats my wifes due date I prob. won't get the car till the first of Dec...
Steel wool......will that mess anything up if I can't get it out afterwards?
98raptor...if you read this PM me please....
The wife and I both passed our drivers test first time and we bought an Opel Frontera, used, its a decent little 4X4 and we live just out side of Landstuhl in Zur Melkerei so the 4wd will be handy for her going through the hills...
I here the Inspection lanes drive your car and then throw up the E-brake to see if it stops ....is this true? If so that is agreat miss-use of the e-brake... they're not ment to work like that... Hell we don't drive drifters.
_________________
98 T/A, A4, T-Top, Black w/ slvr accent
FTRA, Whisper Lid, 160stat, SpeedInc. Dyno Tune, Moser 12blt 3.73's
BMR--STB, Torque Arm, SFC, LCA, Adj. PHB.
ZO6 SLVR 17X9.5 on all4, Kuhmo, Koni sngl adj., Eibach 1.5drop, PowerSlot Rotors,Hawkpads
|
|
| Top |
|
|
Chevroletfreak
|
Post subject: Posted: Sun Sep 23, 2007 8:49 am |
|
 |
| No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
|
|
I was wondering when you would get here. I heard from someone else that you had stopped by the shop. Stop by CTK when you get a chance. I am setting up the bench stock over there.
I just helped a Mustang guy with his setup that failed. We added the Dynomax (I think) cones from summit. That dropped the DB by 4. We then packed the steelwool in front of the cones and that dropped it another 4 DB. He barely passed, but was good to go. I can guarantee that you will not pass the DB check with the AT Catback. That is what my 93 had, but I snuck through right before they started the checks.
I will be working on the same thing when my car gets here in a few weeks.
_________________
My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 32 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
