 |
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 12 posts ] |
|
Author |
Message |
Chevroletfreak
|
Post subject: Yeah my SS is here, but.............. Posted: Fri Oct 26, 2007 8:22 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
The freakin thing won't start. First the battery was extremely dead and would not jump. So, I went and got a new one. Now it will crank , but it won't start. I checked fuel pressure and had about 52PSI at the rail. Then used a plug tester and got clean spark. That tells me the injectors must not be firing. BOA279 suggested I clean the VATS connections both in the cylinder and on the key. I cleaned buth, but it still won't start. Any ideas? I have to get it out of the storage area TOMORROW!
Brian
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Garry
|
Post subject: Posted: Fri Oct 26, 2007 8:26 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Are you getting any SES light or similar?
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Fri Oct 26, 2007 8:28 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
The light is staying on, but I am sure it is because it is only cranking and won't start.
Oil pressure kicks up to 60 and volts are steady.
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Sat Oct 27, 2007 8:27 am |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Any ideas? I am heading there in about an hour.
|
|
Top |
|
Garry
|
Post subject: Posted: Sat Oct 27, 2007 8:31 am |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Hm ... reading the code might help ... or scanning some motor info during crank ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Sat Oct 27, 2007 8:46 am |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Garry, I would love to read codes, but I just got the car yesterday and don't have a scanner yet. I bought it site unseen and had it shipped from the states....believe it or not.
If ANYONE would like to help today, I will be out at the car in Ramstein Meisenbach. Give me a call at 01511-869-4133.
I am also looking for someone to help tow it. I do not have any equipment for that other than a truck.
Thanks
Brian
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Garry
|
Post subject: Posted: Sat Oct 27, 2007 9:12 am |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
I'm about 2 3/4 hours away, which doesn't really help (plus on 24/7 duty) ... maybe you can ask Roy if he can check the trouble codes?
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Sat Oct 27, 2007 9:30 am |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
I have only met him once so I don't have any of his contact information. Hopefully he will chime in here and give me a call. That is exactly what I need at this point.
|
|
Top |
|
Roy
|
Post subject: Posted: Sat Oct 27, 2007 5:57 pm |
|
Joined: Sun May 27, 2001 2:52 pm Posts: 5556 Location: Mehlingen,Rhineland Pfalz, Deutschland
|
Some simple stuff
Check INJ1 and INJ2 fuses . If they are good disconnect the battery for a min of 30 seconds . reconnect and try .
If it still doesn't pull the two 168 pin connectors and look for corrosion .
_________________ Roy My vids on Youtube My vids on Streetfire
|
|
Top |
|
Chevroletfreak
|
Post subject: Posted: Sat Oct 27, 2007 7:26 pm |
|
 |
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Thanks for all the suggestions.
We got it all figured out tonight. Everyone of the plugs were fouled out. I am hoping it wasn't from something that was done during the shipping. My theory is that when I was trying to get it started with the dead battery the injectors were firing, but the plugs could not causing a very lean condition and fouling them out.
Thanks Silas for the plugs.
The beast is ALIVE!!!!!!!!
|
|
Top |
|
Garry
|
Post subject: Posted: Sat Oct 27, 2007 7:40 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Congrats, glad to hear ... think you can make it to the NHRA folks event in November?
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
98blkbrd
|
Post subject: Posted: Sun Oct 28, 2007 5:32 am |
|
Joined: Sun Jun 24, 2007 1:44 pm Posts: 84 Location: Ramstein AB, Germany
|
 Brian
U SUCK......
no really, glad you got it runningl, now if I can just have the same luck tomarrow all will be good......
I thought I was suposed to loose sleep after the kid gets here not before...I want to be a Kapuan as soon as they open.
If you get this today before noon stop by so i can see the ride......Im on R8 after 12 till quitin time.......good 'ol FRED screwing me over again....
jamie
_________________ 98 T/A, A4, T-Top, Black w/ slvr accent
FTRA, Whisper Lid, 160stat, SpeedInc. Dyno Tune, Moser 12blt 3.73's
BMR--STB, Torque Arm, SFC, LCA, Adj. PHB.
ZO6 SLVR 17X9.5 on all4, Kuhmo, Koni sngl adj., Eibach 1.5drop, PowerSlot Rotors,Hawkpads
|
|
Top |
|
|
Page 1 of 1
|
[ 12 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 6 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|  |