F-Body Europe

Jr · **Posted:** Fri Oct 19, 2001 5:48 pm

Sounds good to me I'll talk to you tomarrow!

Dark Angel · **Posted:** Sat Oct 20, 2001 3:28 pm

Scott,
You get those things on yet?

JackZ28 · **Posted:** Sat Oct 20, 2001 3:35 pm

Jesse, why'd you sell yours?

Dark Angel · **Posted:** Sat Oct 20, 2001 10:39 pm

I ordered the BMR poly/rubber. They were on back order and sent me the poly/poly and are sending the rubber bushings when they come in. So I thought I would just use the BMR's. Even if I don't like the rubber bushings, I can put the poly back in, so I thought I would just sell the other ones.

JackZ28 · **Posted:** Sat Oct 20, 2001 11:16 pm

ok cool

Dark Angel · **Posted:** Sun Oct 21, 2001 5:24 am

I just re-read what I typed. You actually understood that?

JackZ28 · **Posted:** Sun Oct 21, 2001 4:39 pm

Not really, that's why I said what I said!!

Dark Angel · **Posted:** Sun Oct 21, 2001 6:03 pm

Thought so. Basically I wanted to try a different type a bushing in the frame side of the LCA and BMR was the only one to offer a poly/rubber combo. Polyurethene in one end and rubber on the other. They sent me the LCA's with poly bushings in both ends, so I am back where I started. But they are supposed to send me a set of rubber bushings when they are off backorder. I had heard alot of good things abut these LCA's so I wanted to try them.

JackZ28 · **Posted:** Sun Oct 21, 2001 6:27 pm

Cool, let us know the results!!

99taws6 · **Joined:** Sat May 26, 2001 6:35 pm **Posts:** 954

Jesse,

Jack and I both have the BMR Rubber/Poly control arms. I can not speak for Jack, but I have no complaints. Brett is a stand up guy and his products are #1 http://www.bmrfabrication.com

Hawk · **Posted:** Sun Oct 21, 2001 7:34 pm

Jesse if you did not sell them to JR let me know.

Dark Angel · **Posted:** Mon Oct 22, 2001 2:08 am

Nope, he had them. Gave them to him on saturday. Sorry.
Did you go from stock to the poly/rubber, or did you have the poly/poly before? I will have the chance to try both on the same LCA, so I will report on what I think.

Jr · **Posted:** Mon Oct 22, 2001 5:13 am

Yup... threw them on about 2 hours after I got them (had to eat breakfast first)... all I noticed is that I can spin my tires alot eaiser while trying to do a brake torque... but off the line it launches much better.... also I can cornor a little faster as well I don't know if that was supposed to help it but it did. Thanks Jessie!

Dark Angel · **Posted:** Mon Oct 22, 2001 5:30 am

hey no problem. Yep, they should help all round. I noticed the difference when I put them on. I didn't notice a difference between them and the BMR poly/poly though. We will see how it is with the poly/rubber when they come in.

TheHylandr · **Posted:** Mon Oct 22, 2001 6:06 am

Quote:

Jack and I both have the BMR Rubber/Poly control arms. I can not speak for Jack, but I have no complaints. Brett is a stand up guy and his products are #1 http://www.bmrfabrication.com

Same goes for me. I've dealt with Brett about 10 times over the past 5 or 6 years and he is always very helpful, very easy to work with and his products are top notch. I'm to the point now where his suspension products are the only ones that I'll buy. Not because all other products are inferior, but because I know if I ever have a problem or need any help, he will bend over backwards to do whatever he can do to facilitate me.

JackZ28 · **Posted:** Mon Oct 22, 2001 7:07 am

He is both a top notch businessman and great cusomter service representative.

Will do business again with him in the near future!!

F-Body Europe

Tubular LCA's

Who is online