F-Body Europe

I am trying to get that light ABS INOP out off my dash. I would like to have ABS up front and bypass the back has anybody heard of how I could do this? Thanks

Bruce what do you have 3channel or4 channel ABS?

I have 1 sensor 2 wires that used to go in the top of the old rear. Tried splicing them together and it worked till I moved the car. The ABS still seems to work in the front tried that this morning.

Bruce
That would be the 3 channel system. The system will never work properly with out the proper number of teeth and spacing on the reluctor ring .
with out the proper signal , the ABS will never work properly.

Alot of 3 channel operators are pulling the abs unit completely and adding a combination valve with an adjustable proportioning valve.

As for the light ,pull the bulb.

Also you might wanto brush up on tthe term thresh holdbraking.

Mental note : do not ride with Bruce on a Banzai blitz down the Autobahn.

Thanks
I am going out this afternoon to slam the brakes. It seems to stop straight not as efficent it pulses about 1/2 what it did. I think you would like the setup I got - the no ABS.