F-Body Europe


It is currently Fri Jul 18, 2025 8:47 am

All times are UTC + 1 hour





Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: inspection question
PostPosted: Thu May 08, 2008 8:28 am 
Offline
Fast Newbie
 WWW  YIM  Profile

Joined: Wed Mar 21, 2007 4:12 am
Posts: 56
Location: Spangdhlem
I'm going to be getting to spang around the end of july. is there any wear that has the requirements for the inspection there...exhaust db mainly, just want to know if ill have to do any thing to my car before i ship it off.

-Tony

_________________
1993 Z28;A4,.008shavedheads,Borla Adj catback,CAI,3.73 gears,Trick flow Elbow,Taylor 8.2 wires,NGK plugs,Pacesetter,UMI brackets,Spohn LCA, Spohn panhard,ZR1's
Image
http://www.fquick.com/towshen


Top
 

 Post subject: Re: inspection question
PostPosted: Thu May 08, 2008 9:08 am 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
First, welcome to the area and FBE!

Here is the actual regulation.
http://rmv.hqusareur.army.mil/190-1/ss190-1.htm

Pay attention to how the Db level is read. They are currently allowing the level to go beyond the regulation to 95Db. It is measured about 3 feet from the tailpipe at a 45 degree angle (IIRC). The car is then revved to 1/2 redline to take the reading.

I can tell you that Kooks LT's w/o cats to a closed Borla will net a 98.8 Db. So, I think you will be vey close and may be able to make it as you are.

Some other hot topics are window tint (can't have it on the sid or windshield glass), tire tread (must be above the wear bars with even wear) and ball joints/sterring system. Also, all lights (even fogs) must be operational if they are on the car. Finally, you have to have a good spare and also must get a first aide kit and triangle. Let me know if you need anything else.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Last edited by Chevroletfreak on Thu May 08, 2008 9:24 am, edited 2 times in total.

Top
 

 Post subject: Re: inspection question
PostPosted: Thu May 08, 2008 9:13 am 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
Oh yeah, that is so cool that there is a 93 coming in to replace a 93 leaving. SRZ is a 93 and he is on his way out the door (unfortunately). Also, the previous toy that I had here was 93Z that I owned for 5 years. So, i've got the 93 knowledge if you need anything.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: inspection question
PostPosted: Thu May 08, 2008 9:53 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Tony! Sup? Follow Brian's advice and you'll be good to go. IF you can throw a cat on there before shipping it'll be even better in helping reduce your DB level. Too bad I'll miss ya but you are in good hands around here.

Silas,

_________________
The "SRZ"
750rwhp, limited to 55mph flyby's in the US.

02' MY Z06, Cam, LT headers, X-pipe, Breathless CAI, Borla Stinger exh, RSD short shifter, Elite catch can, C6Z susp, CCW classic's 18x10 & 18x12...your normal everyday Z06.


Top
 

 Post subject: Re: inspection question
PostPosted: Thu May 08, 2008 1:08 pm 
Offline
Fast Newbie
 WWW  YIM  Profile

Joined: Wed Mar 21, 2007 4:12 am
Posts: 56
Location: Spangdhlem
i have a full exhaust system on there, including a cat. and the link dose not work for me! before i ship the car i'm going to go through it with a fine tooth comb. all my suspension should be good since i did it all about a year and a half ago, but the car has been sitting in my parents garage for the past year. i mainly wanted to know about the exhaust stuff since people are trying to tell me that if i got a after market system i WILL fail.

and thank you for the info!

-Tony

_________________
1993 Z28;A4,.008shavedheads,Borla Adj catback,CAI,3.73 gears,Trick flow Elbow,Taylor 8.2 wires,NGK plugs,Pacesetter,UMI brackets,Spohn LCA, Spohn panhard,ZR1's
Image
http://www.fquick.com/towshen


Top
 

 Post subject: Re: inspection question
PostPosted: Thu May 08, 2008 2:08 pm 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
I think your exhaust will be good to go as is.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: inspection question
PostPosted: Fri May 09, 2008 8:47 am 
Offline
Fast Newbie
 WWW  YIM  Profile

Joined: Wed Mar 21, 2007 4:12 am
Posts: 56
Location: Spangdhlem
got another question. one of my friends who is also going to spangdahlem has a newer dodge ram and hes got his exhaust dumped just in front of the rear axle, will he need to either extend it to the rear bumper or kick it out the side?

_________________
1993 Z28;A4,.008shavedheads,Borla Adj catback,CAI,3.73 gears,Trick flow Elbow,Taylor 8.2 wires,NGK plugs,Pacesetter,UMI brackets,Spohn LCA, Spohn panhard,ZR1's
Image
http://www.fquick.com/towshen


Top
 

 Post subject: Re: inspection question
PostPosted: Fri May 09, 2008 11:01 am 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
93_Z28_Guy wrote:
got another question. one of my friends who is also going to spangdahlem has a newer dodge ram and hes got his exhaust dumped just in front of the rear axle, will he need to either extend it to the rear bumper or kick it out the side?


Absolutely! They won't pass that.

Don't just take my word for it though. Get ahold of the regulation. I have no idea why the link won't work for you.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: inspection question
PostPosted: Fri May 09, 2008 12:09 pm 
Offline
Fast Newbie
 WWW  YIM  Profile

Joined: Wed Mar 21, 2007 4:12 am
Posts: 56
Location: Spangdhlem
i got the reg now(emailed it to me at work and worked fine...stupid Korean internet!!!). and thats kinda what i figured he would need to do.

_________________
1993 Z28;A4,.008shavedheads,Borla Adj catback,CAI,3.73 gears,Trick flow Elbow,Taylor 8.2 wires,NGK plugs,Pacesetter,UMI brackets,Spohn LCA, Spohn panhard,ZR1's
Image
http://www.fquick.com/towshen


Top
 

 Post subject: Re: inspection question
PostPosted: Sat May 10, 2008 2:33 pm 
Offline
Fast Newbie
 WWW  YIM  Profile

Joined: Wed Mar 21, 2007 4:12 am
Posts: 56
Location: Spangdhlem
got another quick question. has there been a lot of cases where stereos disappear out of cars shipping through the AF?

_________________
1993 Z28;A4,.008shavedheads,Borla Adj catback,CAI,3.73 gears,Trick flow Elbow,Taylor 8.2 wires,NGK plugs,Pacesetter,UMI brackets,Spohn LCA, Spohn panhard,ZR1's
Image
http://www.fquick.com/towshen


Top
 

 Post subject: Re: inspection question
PostPosted: Sat May 10, 2008 8:35 pm 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
All 3 of my cars that I shipped got some new scratches. 1 was mil shipped and 2 were private. The only other thing I lost was an SS dash plaque and that was through private ship.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits