 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 19 posts ] |
|
| Author |
Message |
|
99taws6
|
Post subject: Cam install success.............  Posted: Sat Aug 25, 2001 9:58 pm |
|
Joined: Sat May 26, 2001 6:35 pm
Posts: 954
|
|
Well I just returned from doing the cam swap in my car. It took right around 9hrs at a very slow relaxed pace. I also resealed the rear diff, and changed the oil.
Initially the only hard part was just the removal of the radiator. It is a pain in the Arse! Everything else is very straight forward for the removal. I was very concerned with the lifters staying up as I had 2 that wanted to keep falling. Once I rotated it about 50 times they seemed to stay up so I went for it.. It made all kinds of noises coming out that had me worried. The new one went in without a stop. Be forwarned the cam is sharp!!!!!
Got it all together and filled the radiator. Started it up and it loped like a NHRA dragster and was hard to keep running. It was found out to be a loose plug wire:) Then the car had a bad knock, tick or whatever.. I thought it was a rocker arm. Once the oil got to it it went away. Then the car overheated. I forgot to purge the air out of the system.. It took another gallon...
The car seems to idle the same with a noticeable lope from the rear of the car(The loudmouth just got louder) I did not really notice a difference in the power, but John and Dave drove it and said it pulls harder above 3k.
Well overall I am tired, cut, sore.......But really happy all went well..... Thanks for the help John and Dave.......
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Sun Aug 26, 2001 12:39 am |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
Very nice...Congrats 
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
|
|
| Top |
|
|
Robert13p3h
|
Post subject: Posted: Sun Aug 26, 2001 3:19 am |
|
Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
|
|
Alright!
Congrats on the install, and BTW my wife forgot to mail the package, so I'll ship the lite off next week.
Rob
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Sun Aug 26, 2001 4:49 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Good job George and welcome to the elitest LS1 Cam Swap Clup. Where any can join as long as the push the cam in.
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Sun Aug 26, 2001 9:52 am |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
Yeah it pulls like a mofo after 3k. Whole front end lifts off the ground just about. Feels like a VTEC or somethin.
G we gonna have to go crusin now for sure..............
|
|
| Top |
|
|
99taws6
|
Post subject: Posted: Sun Aug 26, 2001 10:53 am |
|
Joined: Sat May 26, 2001 6:35 pm
Posts: 954
|
Quote: Yeah it pulls like a mofo after 3k. Whole front end lifts off the ground just about. Feels like a VTEC or somethin.
G we gonna have to go crusin now for sure..............
Damn I did not realize my car pulled like a V-tech. Well as far a cruisin I am here all day.. Give me a call....
|
|
| Top |
|
|
Robert13p3h
|
Post subject: Posted: Sun Aug 26, 2001 1:30 pm |
|
Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
|
kinda a weird, but since you put the Vtech motor in your car George, there was a post about it in cz28.com. For everyone that wants to know more about the Vtech in George's car check this out http://www.howstuffworks.com/question229.htm
BTW did you just change 1 cam? 
|
|
| Top |
|
|
99taws6
|
Post subject: Here is a few video clips of it..... Posted: Sun Aug 26, 2001 4:10 pm |
|
Joined: Sat May 26, 2001 6:35 pm
Posts: 954
|
|
| Top |
|
|
fbody97
|
Post subject: Posted: Mon Aug 27, 2001 6:47 am |
|
Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
|
|
nice!! won't be long until I'm swapping things too!!
_________________
Dave Brooks
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Mon Aug 27, 2001 4:42 pm |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
You know what I was tryin to say!  It was like it opened up another cam or something to that effect after 3k.
I used to own a VTEC but I WAS NOT NO RICER!
|
|
| Top |
|
|
Sergio-Casino
|
Post subject: Posted: Mon Aug 27, 2001 5:19 pm |
|
Joined: Mon Jun 18, 2001 8:49 am
Posts: 334
Location: Den Helder, Holland
|
Yes it Was and you were a Riceboy !!!!
Banging your music from your damaged speakers and pretending to be R-kelly sitting on your passenger seat 
(remember that guy in the beamer at the Wurzburg meeting ?)
Hahahaahahaha
Where are those damn pictures of your ride John ?
_________________
Sergio
95 'Money Pit' Camaro 3.4 M5 .. Modded LT-1 this summer (2005) !!
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Tue Aug 28, 2001 12:08 pm |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
Here's a sound clip of my cam...
Hot Cam
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
Last edited by TheHylandr on Tue Aug 28, 2001 12:09 pm, edited 1 time in total.
|
|
| Top |
|
|
Robert13p3h
|
Post subject: Posted: Tue Aug 28, 2001 12:57 pm |
|
Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Tue Aug 28, 2001 1:02 pm |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
|
Whooz? Mine or G's? Try to right click on them, hit save as, then when it is saved to your puter, open it.
That usually wurks
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
|
|
| Top |
|
|
Robert13p3h
|
Post subject: Posted: Tue Aug 28, 2001 1:06 pm |
|
Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
|
Quote: Whooz? Mine or G's? Try to right click on them, hit save as, then when it is saved to your puter, open it.
That usually wurks
still no worky, I cant get on your page either. Must be some construction on the superhighway this morning.
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Tue Aug 28, 2001 1:12 pm |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
Hmmmmmmmmm, strange...
try this then...
http://www.fbodylinks.com/sounds/hotcam.wav
I just checked my site and it wurks fer me!?!?!
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Tue Aug 28, 2001 1:16 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
Quote: Here's a sound clip of my cam... Hot CamWow ... 3MB .wav ... maybe you should convert it to mp3 ... (at 30k/s I don't really care, but those ISDN/Modem users ...) Sounds nice, though ...
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
Last edited by Garry on Tue Aug 28, 2001 1:17 pm, edited 1 time in total.
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Tue Aug 28, 2001 1:18 pm |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
LoL, yeah...it's kinda long I forget not everyone has a cable modem
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
|
|
| Top |
|
|
TheHylandr
|
Post subject: Posted: Tue Aug 28, 2001 1:28 pm |
|
Joined: Mon May 28, 2001 3:42 am
Posts: 464
Location: Florida
|
OK, OK...
Here it is as a MP3...
Hot Cam
_________________
-- Jamey --
2005 Caddy CTS-V
2004 Dodge Ram 2500 4x4
2003 Yamaha Raptor
2005 Honda 300EX
2005 Honda Rincon
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 19 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
